First Alert FE3A40GR Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Non First Alert FE3A40GR. First Alert FE3A40GR User's Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
User’s Manual
F
ire Extinguishers
Models FE3A10GR,
F
E3A40GR
IMPORTANT! Please read carefully and save.
This user’s manual contains important information about your fire
e
xtinguisher’s operation. If you are installing this fire extinguisher for
use by others, you must leave this manual—or a copy of it—with the
end user.
Read e
xtinguisher label and the entire user’s manual carefully before
i
nstalling or using the unit. Make sure everyone in your household is
com
pletely familiar with the operation of the extinguisher, and review
t
he instructions regularly. In an emergency, you will not have time to
r
ead instructions.
IMPORTANT INFORMATION ABOUT
FIRE EXTINGUISHERS
NOTE: Be sure the extinguisher is rated to fight the type of fire most
likely to occur in the area you choose to install it. Since household
fires commonly start in the kitchen, you should always install an
extinguisher in the kitchen. For added security, you should also install
additional extinguishers in utility areas, and other living areas in your
household.
FE3A10GR is rated Class 3-A:10-B:C.
FE3A40GR is rated Class 3-A:40-B:C.
READ BEFORE INSTALLING OR USING
T
HI
S F
IRE E
XTINGUISHER!
Fire extinguishers are classified by fire type.The A, B and C
rating system defines the kinds of burning materials each fire
extinguisher is designed to fight. The numbers in front of the
A, B, or C indicate the rating for size of the fire the unit can
extinguish. Using the wrong type of fire extinguisher can do
more harm than good. Make sure you understand which fire
extinguisher to use on each class of fire!
Class A rating:
The agent/powder is suitable for
fighting small fires involving wood, paper, cloth,
rubber, and some plastics.
Class B rating: The agent/powder is suitable for
fighting small fires involving grease, oil, gasoline,
kerosene, and other flammable liquids.
Class C rating: The agent/powder is suitable for
fighting small fires in "live" electrical equipment.
If your First Alert
®
fire extinguisher came with a wall hook:
1. Install the wall hook on a wooden stud or other solid surface that
will support the weight of the extinguisher using the screws or
bolts purchased. Since wall surface types vary,
mounting screws
are not included.
Purchase screws or bolts specifically designed
for the surface on which you will mount the fire extinguisher.
The fire extinguisher label lists its maximum weight.
2. After installing the wall hook, place the extinguisher on the hook with
the label facing outward, so the label can easily be read.
If your First Alert
®
fire extinguisher came with a metal bracket:
1.
Install the metal bracket on a wooden stud or other solid surface
that will support the weight of the extinguisher using the screws or
bo
lts purchased. Since wall surface types vary,
m
ounting screws
are not included.
Purchase screws or bolts specifically designed
for the surface on which you will mount the fire extinguisher.
The fire extinguisher label lists its maximum weight.
2
.
After installing the metal bracket, place the extinguisher on the
bracket with the label facing outward, so the label can easily be read.
Raise and wrap the
bracket straps around the cylinder and snap
the buckle closed.
CHE
CKING AND INSPECTING THE
FIRE EXTINGUISHER
1.
Inspect the extinguisher once a week.
Remove the extinguisher
from the mounting device and inspect the gauge. If the gauge pointer
is a
nywhere in the green band, the extinguisher is properly charged
and ready to use. If the gauge reads "RECHARGE," the extinguisher
has lost pressure and must be refilled.
2
.
C
he
ck f
or sig
ns o
f damage or misuse. Make sure you can still
read all the text on the label. Carefully examine the surface of
the extinguisher for corrosion.You can help prevent corrosion
b
y clea
ning the extinguisher if it gets wet or dirty. If you notice
corrosion during the warranty period, return the unit to First Alert
®
(se
e "L
i
m
ited Warranty" at the end of this manual).
3. Make sure the tamper indicator ("safety seal") is still intact and the
no
z
zle is clean and unobstructed.
C
on
t
in
ue
d...
CHECKING AND INSPECTING THE FIRE EXTINGUISHER,
C
ontinued
4
. Record all inspection and maintenance dates on the tag included
with the fire extinguisher.
5
. When you finish inspecting the fire extinguisher, always put it back
on
to the mounting
d
evice
.
Make sure the safety seal is intact.
F
or more information about fire extinguishers, consult the NFPA
S
tandard #10, "Portable Fire Extinguishers," available from the National
F
ire Protection Association, Inc., Batterymarch Park, Quincy, MA 02169,
U
SA.
HOW TO INSTALL THIS EXTINGUISHER
MOUNTING YOUR FIRE EXTINGUISHER
WHE
RE TO INSTALL THIS EXTINGUISHER
A Fire Extinguisher Should Be Mounted:
In the vicinity of (but not on or in) a potential source of heat
and/or fi
re, like an oven or stove.
Where it is easy to reach, near an exit or an escape route from
the room.
In a location that is convenient, in plain sight, and 3-1/2 to 5
f
eet (1 to 1.5 meters) above the floor.
Store the extinguisher high enough to keep it out of the reach
of small children.
On a clean, dry surface where the temperature does not go
ab
ove 120° F (49° C) or below –40° F (–40° C).
Do not mount the extinguisher on drywall or plaster without
adeq
uate support. Use strong screws or bolts to mount the
bracket securely into solid wood or metal that can support
it, like a wooden partition stud. Secure mounting is needed
s
o you can remove the extinguisher quickly and easily in an
emergency. Also, if the extinguisher is not held securely, it
could drop to the floor and injure people or damage the
e
xtinguisher.
Do not break the plastic loop holding the safety pin in place!
T
his loop prevents accidental discharge of the fire extin-
guisher. Break the loop only in an emergency before using
the fi
re extinguisher.
HOW TO OPERATE YOUR FIRE
EXTINGUISHER IN A FIRE EMERGENCY
TO FIGHT THE FIRE
1. Lift the extinguisher off the mounting device and remove nozzle
from the holding strap. If your fire extinguisher came with a metal
bracket, unbuckle the metal strap to remove the extinguisher from
the mounting device.
2
. Hold the unit firmly in an upright position. Pull out the safety pin
to break the safety seal or tamper indicator. Make sure the extin-
guisher nozzle faces away from you.
3. Stand back from the fire at least 10 feet (3 meters), and make sure
t
he fir
e is no
t be
tw
een you and your exit.
4
.
H
o
ld t
he e
xtinguisher upright and aim the nozzle at the base of
the fire.
5
. Press the lever to discharge the powder.
6
. Sweep the spray at the base of the burning material, using quick
sid
e-t
o-sid
e mo
t
ions
.
(If the spray scatters the fire, move back.)
7. Move slowly towards the fire as the extinguisher spray pushes
the fire back. Maintain a 10-foot (3 meter) distance between you
and the front of the fire at all times.
8. Completely discharge the contents of the extinguisher and make
sur
e t
he fir
e is com
pletely out. Flashbacks are common with fires.
9. For kitchen fires on a kitchen stove, turn off the stove immediately
if possible, otherwise as soon as it is safe.
10. If you suspect a fire had an electrical origin, shut off the electrical
po
w
e
r
,
if possi
ble, without eliminating your escape route. Do not
touch electrical wires or appliances.
1
1
. After you have completely discharged your extinguisher, leave the
building and close all the doors behind you.
AFTER THE FIRE IS EXTINGUISHED
D
o not turn the electrical power back on or plug in any appliances
un
ti
l the area has been cleaned up comple
tely
.
I
t is v
ery important
to remove the powder from electrical equipment after a fire. If the
powder gets wet, it can conduct electricity. (Using a dry chemical
e
x
ti
nguisher on wet electrical equipment may be hazardous for this
reason.) This may worsen an electrical leakage problem, impair the
equipment’s insulation, or create an electrical shock hazard.
Continued...
Make sure your extinguisher may be safely and effectively
us
ed on the small fire you want to fight.Always use extreme
caution when fighting any fire. Fight a fire only where there is
a clear escape p
ath to allow you to get out safely if the fire
ge
ts worse.
Avoid breathing smoke and heated fumes; stay low if
necessary. Burning materials will release toxic fumes.
I
nhaling these fumes may cause injury or death.
Always stand back far enough away from the fire—near
an exit—and make sure nothing is between you and your
escape r
oute. If you get too close to a fire, you risk getting
burned or hit b
y splattering material like grease. If the fire is
too hot or smoky for you to get within 10 feet (3 meters), DO
N
OT try to fight the fire yourself. Evacuate immediately and
ca
ll the Fire Department. Stand back no less than 10 feet (3
meters) from the fire.
For fires on a kitchen stove, turn oven or burners off
immediately if possible. If you can’t reach the oven or burner
con
trols safely, extinguish the fire first, then turn them off.
Fight the fire from an upwind direction with your back to any
s
trong air current.Trying to fight a fire with currents blowing
towards you can result in serious injury.
IF YOUR EXTINGUISHER NEEDS SERVICE
This fire extinguisher is rechargeable by a certified fire equipment
d
ealer, regardless of how much of the content was used.
Once a year, a certified fire equipment dealer, in accordance with the
se
rvice manual identified on the fire extinguisher label, should service
t
he fire extinguisher. Please refer to your local telephone directory for a
certified dealer.
D
o not try to service or repair this fire extinguisher under any
ci
rcumstances. Do not try to remove the hose, nozzle or valve
ass
embly. This is a pressurized device that can cause serious
i
njury if tampered with.
If t
here is a problem and it is still under warranty, please see How to
O
btain Warranty Service in the Limited Warranty.
DISPOSING OF A USED EXTINGUISHER
If you choose not to have a used extinguisher refilled or a non-working
unit repaired, take it outdoors, turn it upside down, and discharge it
completely. Dispose of the empty unit properly, and replace it with a
new fire extinguisher.
Never puncture, burn or expose this fire extinguisher to tempera-
tures over 150° F (66° C) even if it is fully discharged. The contents
are under pressure and it could explode.
LIMITED WARRANTY
BRK Brands, Inc. ("BRK") the maker of First Alert
®
brand products,
warrants that for a period of ten years from the date of purchase, this
product will be free from defects in material and workmanship.
BRK, at its option, will repair or replace this product or any component
of the product found to be defective during the warranty period.
Replacement will be made with a new or remanufactured product or
component. If the product is no longer available, replacement may be
made with a similar product of equal or greater value.This is your
exclusive warranty.
This warranty is valid for the original retail purchaser from the date of
initial retail purchase and is not transferable. Keep the original sales
receipt. Proof of purchase is required to obtain warranty performance.
B
R
K d
ea
le
rs, service centers, or retail stores selling BRK products do
not have the right to alter, modify or any way change the terms and
conditions of this warranty.
This warranty does not cover normal wear of parts or damage result-
ing from any of the following: negligent use or misuse of the product,
use on improper voltage or current, use contrary to the operating
instructions, disassembly, repair or alteration by anyone other than
B
RK or an authorized service center. Further, the warranty does not
co
v
e
r act
s o
f G
od
, such as fire, flood, hurricanes and tornadoes.
BRK shall not be liable for any incidental or consequential damages
ca
use
d b
y t
he br
each o
f a
ny express or implied warranty. Except
to the extent prohibited by applicable law, any implied warranty of
merchantability or fitness for a particular purpose is limited in duration
t
o t
he d
uration of the above warranty. Some states, provinces, or
jurisdictions do not allow the exclusion or limitation of incidental or
conse
q
ue
n
tial damages or limitations on how long an implied warranty
lasts, so the above limitations or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have
other rights that vary from state to state, or province to province.
How to Obtain Warranty Service:
Service:
If service is required, do not return the product to your
r
etailer. In order to obtain warranty service, contact the Consumer
Affairs Division at 1-800-323-9005, 7:30 AM to 5:00 PM, Central
S
t
a
ndard Time, Monday through Friday. To assist in serving you, please
have the model number and date of purchase available when calling.
Address: 303 Nelson Avenue, Neosho, MO 64850-8806
M08-0158-001 M 10/05
First Alert
®
is a registered trademark of the First Alert Trust used under
l
ice
nse.
Heavy-Duty
F
ire Extinguisher
M
odel FE3A10GR
1 2 3 4
© 2005 BRK Brands, Inc. All Rights Reserved.
First Alert
®
, 3901 Libe
rty Street Road,Aurora, IL 60504-8122
Consumer Affairs: (800) 323-9005 • www.firstalert.com
Thank you for choosing First Alert
®
for your fire extinguisher needs.
Y
ou have purchased a high quality fire extinguisher designed to
protect you and your family in case of a fire danger.
M0
8-0158-001
M 1
0/05
Heavy-Duty Plus
F
ire Extinguisher
Model FE3A40GR
Parts of This
F
ire Extinguisher
Wall Hook Mounting
M
etal Bracket Mounting
Safety
Pin
Le
ver
Handle
Pre
ssure
Gauge
Break Seal
and Pull Out
the Safety Pin
Aim Nozzle at
Base of Fire
Press Lever To
Discharge Powder
T
his e
x
ti
n
g
uisher is designed for use against small fires
that have just started and are small enough to fight safely.
It is not designed to fight large fires that are burning out of
con
tr
ol
. If the fire is too hot or smoky for you to get within
10 feet (3 meters) of it, do not try to fight it yourself.Warn
everyone, evacuate the premises, and have someone call the
Fire Department from outside the building.Trying to fight a
large fire yourself can result in injury or death.
Do not puncture or burn any fire extinguisher. The contents
are under pressure, and the extinguisher could explode.
N
e
v
er l
o
ca
te this extinguisher close to an engine, stove or
other source of heat. It is pressurized and could rupture or
explode if exposed to temperatures over 150° F (66° C).
This extinguisher contains a dry powder extinguishing agent.
The agent/powder is nontoxic, but can irritate skin. When
us
ing this unit, avoid breathing the powder. Always ventilate
the area after use.
DO NOT CHECK THE PRESSURE OR TESTTHE FIRE
EX
T
I
N
G
U
ISH
ER BY SQUEEZING THE LEVER, EVEN BRIEFLY.
ONCE USED, IT WILL GRADUALLY LOSE PRESSURE AND
WILL NOT BE FULLY CHARGED FOR USE IN AN EMERGENCY.
O
nly an auth
oriz
ed fi
re eq
ui
pment dealer must refill this
extinguisher. The extinguisher must be refilled with the
same chemical that it contained when it was first purchased.
I
mpr
oper fi
lling can result in non-working or dangerous units.
This unit wi
ll not operate when it is on the mounting device.
The extinguisher must be removed from the mounting device
or it cannot discharge its contents to fight a fire.
HO
W TO CLEAN AFTER USING A FIRE
EXTINGUISHER
N
OTE:
T
he powder spray from the extinguisher may spread over a
w
ide area, and may soil upholstery, carpets and walls.
Sweep/vacuum up as much of the powder as possible.Then use
a d
amp cloth to wipe off the remaining agent.
If you have any questions about cleaning appliances that the
agent has come into contact with, please contact the appliance
ma
nufacturer.
AFTER THE FIRE IS EXTINGUISHED, Continued
If the fi
re was on a kitchen stove:
Make sure the oven and all burners are turned off.
Clean up the powder completely before using the stove or oven.
See “How to Clean After Using a Fire Extinguisher”. Ventilate the
ar
ea thoroughly.
If you think the fire had an electrical origin:
Shut off the electrical power, if possible--do not touch any
ele
ctrical wires or appliances.
Leave the building and close all doors behind you. Call the Fire
D
epartment and have them inspect the entire house. As soon as
t
hey say it’s safe to return, ventilate the area thoroughly.
Have a licensed electrician inspect your electrical system. Do not
turn the power back on or plug in any electrical equipment until
t
he inspection has been completed.
Vue de la page 0
1

Résumé du contenu

Page 1 - User’s Manual

User’s ManualFire ExtinguishersModels FE3A10GR,FE3A40GRIMPORTANT! Please read carefully and save.This user’s manual contains important information abo

Commentaires sur ces manuels

Pas de commentaire