First Alert 2084F Manuel d'utilisateur télécharger pdf (Page 6)

Home and Ofﬁce Security Safes

Additional Features: Bolt-Down Kit

Installation Procedure

1. Choose a mounting location that is easily

accessible from both above and below.

2.Carefullypositionthetemplateonthe

location that you want to mount the safe.

3.Createtheguidemarksbypressingasharp

tool through the circles at the four corners of

the template and into the mounting location.

4.Drillahole(thediameterofthebreak-offbolt

shaft) through each guide mark.

5. Before attaching the safe, you should check

carefullythatthe4holesyouhavedrilled

match up precisely with the holes that have

beenpre-drilledinthebottomofthesafe.

Note: On certain models, It may be necessary

to remove the rubber foot pads that are

screwedintothebolt-downholesatthe

factory.

6.Onceyouhaveconrmedthattheholes

are aligned and in the location you desire,

installthebreak-offboltsandwashersfrom

underneath the mounting location (through

thefurnitureorshelf),andintothepre-drilled

holes in the safe.

7. Turn bolts until the screw heads break off.

Model 2054F (only)

Important: DON’T DRILL SAFE

Do not drill into the feet, bottom or any other

part of safe! Doing so will ELIMINATE THE FIRE

PROTECTION that has been designed into your

safe and invalidate all stated warranties.

Installing Your Safe

CertainmodelsincludeaBolt-Downkitwithbreak-offboltsandamounting

template for permanent mounting to a ﬂat surface. Once the safe is installed

usingthebreak-offbolts,itispermanentandcannotbeeasilyremoved.

Tools Required

 4Break-offBolts(Supplied)

 4Washers(Supplied)

1 Mounting Template (Supplied)

1 Drill

1 Screwdriver

Additional Features: Bolt-Down Kit

Model 2054F (only)

Important: SECURING TO FLOOR

Many consumers prefer to bolt their safe to the oor to

increase protection from theft and resistance to tipping.

If your safe was manufactured with bolt down holes pre-

drilled in the oor of the safe, bolting your safe to the

oor may provide additional theft deterrence.

If you have ANY QUESTIONS about how to accomplish

this, or are uncomfortable using the tools necessary

to complete this project, please check with your local

retailer, home center, or independent contractor.

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

First Alert 2084F Manuel d'utilisateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Stands d'équipement audiovisuel First Alert 2084F