First Alert N8891-1 Manuel d'utilisateur télécharger pdf (Page 14)

– 14 –

6(&85,1*7+(35(0,6(6

Disarming the System

Use the

OFF

key to disarm the system and to silence alarm and trouble sounds. See the

SUMMARY OF AUDIBLE NOTIFICATION section for information which will help you

to distinguish between fire and burglary alarm sounds.

IMPORTANT: If you return and the main burglary sounder is on, DO NOT enter the

premises, but call the police from a nearby safe location. If you return after an alarm has

occurred and the main sounder has shut itself off, the keypad will beep rapidly upon

entering, indicating that an alarm has occurred during your absence and an intruder may

still be on the premises. LEAVE IMMEDIATELY and CONTACT THE POLICE from

a nearby safe location.

To disarm the system and silence burglary alarms:

* * * *

OFF

Your security code

The READY light will light (if no alarms have occurred while armed) and the keypad will

beep once to confirm that the system is disarmed.

Memory of Alarm

If an alarm occurs, the keypad displays the zone number (s) that caused the alarm and the

type of alarm (e.g., “FIRE ALARM”). These messages remain displayed until cleared by

a user.

To clear the display, note the zone number displayed and enter an OFF sequence (enter

your security code and press the

OFF

key).

If the READY light is blinking, go to the displayed zone and correct the fault (close

windows, etc.). If the fault cannot be corrected, notify your alarm company.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Pas de commentaire

First Alert N8891-1 Manuel d'utilisateur Page 14