First Alert FA1220CV Manuel d'utilisateur télécharger pdf (Page 37)

– 37 –

TESTING THE SYSTEM

(TO BE CONDUCTED WEEKLY)

Using the 5

TEST Key

The TEST key puts your system into Test mode, which allows each protection point to be

checked for proper operation.

1. Disarm the system and close all protected windows, doors, etc. READY should be

displayed.

TEST

2. Enter your security code and press the 5 key.

3. The external sounder should sound for 3 seconds and then turn off. If the sounder does

not sound, it may be due to dialer communication activity. Wait a few minutes and try

again. If the sounder still does not sound, CALL FOR SERVICE IMMEDIATELY.

4. The keypad will sound a single beep every 15 seconds as a reminder that the system is in

Test mode. Each time a protection zone is faulted (opened), the keypad should beep three

times. If the keypad does not sound, CALL FOR SERVICE IMMEDIATELY.

Note that no alarm reports will be sent to the central monitoring station while the

system is in the Test mode.

(Continued)

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 59 60

Pas de commentaire

First Alert FA1220CV Manuel d'utilisateur Page 37