First Alert FA162C Manuel d'utilisateur télécharger pdf (Page 26)

– 26 –

PAGING FEATURE

If the paging feature has been programmed for your system, a pager will respond to certain conditions as they

occur in your system by displaying a 10-digit code that will indicate the type of condition that has occurred. The

10-digit code will use the following format:

SSSS–EEE–NNN

SSSS will be your particular 4-digit subscriber No. (this same number will always appear at the beginning of the

display on your pager).

EEE will be a 3-digit number that describes the event that has occurred in your system (see explanation below).

NNN will be a 3-digit User or a zone number, depending on the type of event that has occurred.

The 3-digit Event Codes (EEE) that can be displayed are:

911 = Alarm (NNN that follows this code will be the zone number that has caused the alarm)

001 = Open, System disarmed (NNN that follows this code will be the User number)

002 = Close, System armed (NNN that follows this code will be the User number)

811 = Trouble (NNN that follows this code will be the zone number that has caused the trouble)

Example 1.

Pager displays: 1234–911–004

This indicates that your system (Subscriber No. 1234) is reporting an Alarm (911), due to zone 4 (004) being

faulted.

Example 2.

Pager displays: 1234–001–005

This indicates that your system (Subscriber No. 1234) is reporting an open/disarming (001) by User 5 (005).

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Pas de commentaire

First Alert FA162C Manuel d'utilisateur Page 26